Edinburgh in winter. It’s dark by half three, the wind has opinions, and everything is vaguely damp. But spare a thought for what’s happening beneath your feet. While you’re layering up, the sewer network is having a rough time too.
Cold Snaps and Crabbit Pipes

Buried or not, our drainage systems feel the winter weather. Here’s what the cold gets up to:
- Freeze-thaw damage: Water seeps into cracks, freezes, expands, thaws, then does it all again. It’s basically a tiny, very patient demolition crew. Joints shift, defects widen and manholes take a battering.
- Fats, oils and grease: Cold temperatures make grease set like candle wax on pipe walls. Capacity shrinks, blockages build, and nobody enjoys a fatberg.
- Snowmelt and rain-on-snow: A sudden thaw plus a downpour sends huge volumes of water towards the drains all at once. Frozen or saturated ground can’t soak anything up, so it all heads for the network.
- Ice and debris: Screens, culverts, outfalls and CSOs can clog up. Yes, we’re back to our favourite poorly maintained CSO screen.
- Pumping stations: Cold and storm events mean pumps and equipment work overtime, and they’d like a word with HR.
Enter Hydraulic Modelling (Cape Optional)
This is where the fun begins. Using state of the art Innovyze ICM software, we build a virtual version of a foul, combined or surface water network, then throw winter at it. Gently, of course.
Sewer modelling lets us:
- Simulate winter storms, snowmelt and high groundwater
- Test partial blockages, grease build-up and reduced pipe capacity
- Check CSO spill performance and sewer flooding risk
- Spot bottlenecks before they become problems
- Compare fixes, from SuDS to network upgrades
Of course, a model is only as good as its data. Rubbish in, rubbish out. Winter flow monitoring, rainfall records and good survey information help us calibrate the model so it reflects what the network actually does, not what we hope it does.

Modelling a Proper Scottish Winter (new)
So what does “throwing winter at it” actually involve? Our modellers can run a range of scenarios to see where a network starts to struggle:
- Design storms on top of snowmelt, to mimic that sudden thaw when the sky joins in
- High groundwater and saturated ground, when infiltration creeps up and capacity quietly disappears
- Restricted pipes, where sediment or grease changes how water finds its way through the system
- Climate change allowances, to check that today’s network can cope with tomorrow’s weather
Comparing the results shows where flooding is most likely to start, how often CSOs might spill and which upgrades would make the biggest difference. Think of it as a stress test, except the model does all the shivering.
It’s Not Just the Sewers (new)
Clean water networks don’t get off lightly either. Freezing temperatures and ground movement put stress on water mains, and cold spells can shift demand patterns and change how pressure behaves across a supply system. That’s where our clean water modelling and flow and pressure testing come in, helping to show how a network performs when winter gets stroppy.

Wetter Winters Ahead
Climate change is expected to bring wetter winters and heavier rainfall to Scotland, so understanding how drainage systems cope with seasonal extremes matters more than ever. Hydraulic modelling helps developers, local authorities and utilities plan ahead, prioritise maintenance and reduce flood risk before the weather gets going.
The Caley-Approved Winter Checklist (new)
Before the next cold snap arrives, it’s worth asking:
- Do we know our network? Up-to-date records and reliable survey data are the foundation of any good model.
- Where are the trouble spots? Screens, culverts, outfalls and grease-prone areas deserve extra attention.
- Are we collecting the right data? Flow and rainfall monitoring tell the real story.
- Have we tested the “what ifs”? Better a model finds the weak point than a flooded street.
- Have we called an expert? Preferably before the first frost, not after the first flood.
Caley Water: Warm Hearts, Cold Pipes
Caley Water is an Edinburgh-based environmental engineering consultancy specialising in hydraulic modelling, flood risk analysis and flow and pressure testing. We model both clean water and wastewater networks, in every season.
Reviewing a sewer network before the cold really bites, or investigating a flooding problem? Get in touch with our team.
And since we can’t resist:
Frost on the manholes, ice on the screen,
Grease setting hard where it shouldn’t have been.
But model it well and plan what’s ahead,
And the flows keep flowing while you stay in bed.
